Hunting & Binoculars

Best binoculars for Hunting – Reviews & Buying Guide

  • Bowhunting
  • Camping
  • Fishing
  • Hiking
  • Hunting Binoculars
    • Buying Guide
    • For Birdwatching
    • Night Vision
  • Accesories
    • Hunting Boots
  • Reviews
  • Guides

Best Light To Use Night Coyote Hunting

Best Light To Use Night Coyote Hunting
(Last Updated On: July 12, 2018)

Contents

  • 1 Best Light To Use Night Coyote Hunting – Buying Guide
      • 1.0.1 1. Zebralight SC52 L2 AA Flashlight Cool White
      • 1.0.2 Specifications/Features
        • 1.0.2.1 The light also has the following features:
      • 1.0.3 First Impressions
      • 1.0.4 User Interface
      • 1.0.5 Guarantee
      • 1.0.6 The Zebralight SC52 output and runtime
        • 1.0.6.1 These are as follows:
      • 1.0.7 Runtime test
      • 1.0.8 The different modes
      • 1.0.9 How tough is it? What about winter?
      • 1.0.10 2. Olight M20SX Javelot M20-X 820 Lumen LED Flashlight
        • 1.0.10.1 First Impressions
        • 1.0.10.2 Runtime
        • 1.0.10.3 Output
        • 1.0.10.4 The Olight M20SX in Winter

Best Light To Use Night Coyote Hunting – Buying Guide

1. Zebralight SC52 L2 AA Flashlight Cool White

The Zebralight SC52 could fit the bill for those looking for a tough, bright and floody EDC led flashlight. It is not cheap but it includes a variety of features which may make you part with your cash.

Specifications/Features

The Zebralight SC52 is powered by a single AA battery or its rechargeable equivalent. You cannot use a 14500 lithium battery with this light.

  • Length: 7.82cm (3.08inches)
  • Width: 2.36cm (0.93inches)
  • Weight (with battery and headband): 84.9g (2.99oz)
  • Weight (without the above): 40g (1.4oz)

The light also has the following features:

  • LED: Cree XM-L2 (cool white)
  • Reflector: Orange peel
  • Water-resistance: IPX7 (2 meters, 30 minutes)
  • Finish: Type III anodising

First Impressions

The Zebralight SC52 came in a brown cardboard box which betrayed no details of the contents within. I welcomed this simplicity as the lack of gloss presumably cuts costs and makes it easier for the user to discard it without a second thought.

Although I was aware of the dimensions in advance, I was still amazed at how small the torch was. To give you an idea, it is pictured next to a conventional single AA flashlight, as well as an AAA keychain light. With this size, it could conceivably have been marketed as a very sophisticated keychain light itself.

The anodising is type III and seems excellent. You can only carry the SC52 bezel-down with the clip supplied. The clip is attached to the light with 2 screws and is removable.

Zebralight SC52F L2 AA Floody Flashlight Cool White

If you lay the light on a flat surface with the switch facing upwards, the SC52 has excellent anti-roll properties. Even if the light is not placed as described, it will still only roll slightly on a flat surface because the bezel is slightly flat on two sides.

The SC52 is also supplied with a headband so that you can use it as a headlamp. This is meant as a back-up, rather than a serious replacement for a real headlamp. Curiously, instead of wearing the light on your forehead, it is held at the side of your head and feels quite comfortable.

User Interface

The light is operated by pressing the switch on the bezel. You have the option of switching on high or low first. One quick press switches on to high. Press for longer to access the low mode.

There are three main modes and each of them has a sub-level, (see output and runtime) or, in the case of high mode, a sub-level with three alternatives to choose from.

If you want to cycle through the main modes you keep the switch pressed down and hold it once you have reached the desired level then release to reach the corresponding sub-level.

This actually sounds complicated but, put simply, you need a maximum number of six clicks to reach the desired level. Although Zebralight SC52 does not mention it in the manual, you can actually reach the medium mode by double-clicking in off mode.

However, accessing and programming one of the three different sub-levels on high mode involves a series of six double-clicks and is much too long-winded, in my opinion.

There is no automatic mode memory and momentary activation is not possible.

The light can be used in candle mode on a soft or hard flat surface. Lock-out is possible by loosening the tail cap. This may be particularly important for those using the SC52 as an EDC led flashlight, since the switch does not need too much pressure to turn on.

Guarantee

Zebralight offers a replacement or return policy within 30 days of purchase and a one year warranty at Zebralight company.

The Zebralight SC52 output and runtime

These are as follows:

  • High: H1 285 Lm (0.9 hrs) or H2 175 Lm (1.7 hrs) / 110 Lm (3 hrs)
  • Medium: M1 51 Lm (7.5 hrs) or M2 26 Lm (12 hrs) / 12 Lm (27 hrs)
  • Low: L1 2.8 Lm (4 days) or L2 0.34 Lm (3 weeks) / 0.06 Lm (2 months) / 0.01 Lm (3 months)

Runtime test

I tested the SC52 with a fully charged 2600mAh on high mode. On 285 lumens it managed 51 minutes, just three minutes short of Zebralight’s figures. The light becomes warm but you can still hold it as long as you do not grip too tightly.

The different modes

The high level of 285 lumens is very bright for a 1x AA light, but this should not be confused with how far the torch can light. The SC52 produces a floody beam which illuminates very well for up to 35 metres.

You may well find it more useful to switch down to the lower high level of 175 lumens. For one thing, it lights almost as far, albeit not so brightly. For another, the runtime of 1.7 hours competes with lights running on 2 AA batteries.

For closer distances up to 10 metres the higher medium level produces a broad beam with a slight hotspot and is certainly sufficient for lighting in and around the house unless you have a big garden.

Without wishing to condone illegal activities, the lowest mode may be described as very good for burglars. With this level of light, you can easily detect valuable items indoors while remaining inconspicuous at the same time. In addition, the supplied headband means you can help yourself to the goodies with both hands.

For more law-abiding citizens, this level is good for reading in the dark but you may find the higher low level of 2.8 lumens better for tired eyes.

As mentioned before, the torch comes with a headband allowing the torch to be worn at the side of the head. I was pleasantly surprised to see that the beam was fairly well-centred in front of me. One disadvantage, however, is that you can only adjust the beam distance by moving the headband up or down.

I tried it for jogging and it didn’t work well because the light was rather unsteady in the holder. For more sedate pastimes, though, such as walking the dog or car repair work it may be worth consideration.

How tough is it? What about winter?

I performed a waterproof test leaving the light switched on in a bowl of water for 30 minutes. The Zebralight SC52 was unaffected by this dunking.

I also left it in the freezer at -18°C for 7 hours to try to replicate wintry conditions. After taking it out, the lamp switched on and cycled through the modes without a hitch.

I also dropped it twice on a pile of stones from a height of 1.5 metres. The damage inflicted was barely visible – a slight scratch on the tail cap and another at the edge of the bezel. As before, the light performed faultlessly afterwards.

The Zebralight SC52 could fit the bill for those looking for a tough, bright and floody EDC torch. It is not cheap but it includes a variety of features which may make you part with your cash.

For one thing, the grey anodising not only looks pretty in comparison to the usual black finish, it also stays pretty, or at least it does after these rather superficial impact tests. Moreover, seven hours in the freezer at -18°C makes it more than winterproof for most people. The water test is a further indication of the light’s reliability in extreme conditions.

For those, like me, who hate multi-mode lights, Zebralight SC52 has at least attempted to simplify things with the one-handed operation. In addition, the runtime on the second highest mode of 151 lumens is exceptional. This may well be the most useful light level for those who want to light medium distances but would like a higher level for more detail.
The headband is also an unusual and welcome accessory, enabling you to convert the torch into a headlamp although it should be regarded as a back-up rather than a replacement for the real thing.

There were rather mixed results while biking. The Zebralight SC52 performed well on less challenging terrain, but it should not be used where you are uncertain of potential dangers. Then again, it does seem rather unfair to complain about a single AA light not performing too well off-road. For normal streets and familiar unlit paths it works very well and is ultra-portable when you reach your destination.

The awkward configuration of the different high modes, however, came as an unpleasant surprise, particularly as everything else is easily accessible.

Nevertheless, the Zebralight SC52 makes a very convincing case for itself. If you are looking for an all-weather light with a very good runtime on a single AA battery and are more interested in medium to close-up illumination, this flashlight may well be worthy of consideration.

2. Olight M20SX Javelot M20-X 820 Lumen LED Flashlight

The Olight M20SX is a fantastic piece of outdoor equipment. It has a very attractive combination of terrific workmanship, above-average runtime on maximum and great output. It serves me very well outside, has useful extra functions and is easy to operate.

I bought the Olight M20SX after doing a lot of online research on the different torches powered by 18650 or CR123A batteries. I was looking for a light that was as compact as a 2 x AA battery model but more powerful. I found that most of the premium flashlight producers offered very similar models in this category, so I chose what I considered to be the best combination of output, runtime and price.

First Impressions

The Warrior came with some useful accessories such as a glow-in-the-dark tail cap and spare o-rings. I was very impressed by the holster supplied. It is not only very sturdy, but also offers side pockets to carry spare batteries. There is also a battery case to stop CR123A batteries from rattling inside the holster.

Of course, the torch itself was my main focus of attention. I liked the solid build quality, and, after removing the tactical ring and the steel clip, the M20-X felt great in my hand too. The torch is made out of aircraft grade aluminium.

The M20-X has a lock-out function to stop it switching on by accident. It also has a momentary activation feature and memorises the last light level used.

The Warrior claims to fulfill the MIL STD 810F standard, which, after reading Wikipedia, has left me more confused than enlightened. I guess I’ll just have to test it myself under adverse conditions.

Runtime

According to the Olight the M20-X Warrior has the following output and runtimes:

  • 500 lumens for 1.5 hours
  • 100 lumens for 5 hours
  • 10 lumens for 85 hours
  • 500 lumens for 3 hours Strobe

These figures were very important for me. Although the torch is brighter with CR123A batteries, Olight M20-X claims that the runtime is longer (one hour longer) with a single 18650 rechargeable cell. I was prepared to trade the brightness for the runtime and had decided in advance that I would power it with a 18650 rechargeable.

For my test I just fitted the flashlight with a fully charged 2600mAh battery, switched it on max and watched how the light developed until the very end.

The M20-X was warm to touch for the first 90 minutes, but neither hot nor uncomfortable. For the first 2 hours, it remained very bright but started to dim gradually over the next 60 minutes. Even after more than three hours it was still easily able to light up to 25 metres, which for me was a revelation. It switched itself off just after 4 hours.

Output

I sometimes think that LED Flashlight producers fix their lighting distances at an annual competition to see who can make the most ludicrous claims.

Perhaps they exaggerate because they know that other factors such as runtime are clearly reviewed on several independent flashlight sites. These sites, however, will not tell you how far a torch can light. This is because there so many factors involved – it could be a rainy or misty night, there may be a full / partial moon, streetlamps or a car’s headlights in the distance etc.

If this is important for you, it may be a good idea to contact reputable dealers and ask them how far the torch can light. Ignore the starry-eyed retailers who just quote the company propaganda. I did exactly this and chose the dealer who gave the most realistic appraisal.

Olight claims a lighting distance of 250 metres. Moving away from the marketing brochure, and back to the real world: on a clear dark night I would say 120 metres with a 18650 rechargeable and 150 metres with 2 x CR123A batteries is the absolute limit. I have tested this under various conditions and would say a little over 110 metres is the norm. The beam is tight and smooth and everything at a medium distance of 40 metres or so will appear as clear as daylight.

On medium the Olight is great for at least 50 metres. For me, this is the most useful level, but it is also good to know there is something more powerful in reserve.

The lowest level, advertised at 7 lumens, is also surprisingly bright – certainly bright enough for walking your dog on a dark evening.

I never use the strobe (blinking) function, and actually see it as a hindrance when switching through the different levels. However, most flashlights in this category have this function, so I just have to tolerate it.

The Olight M20SX in Winter

I have dynamo lighting powered by the wheel hub, which is fine for riding around town. On unlit paths, however, you really need an extra source of light. I tried the M20SX to see how clearly and how far it lights up the way ahead.

I used the M20-X in combination with the Twofish Lockblocks bike mount. When testing the torch, I used the medium setting on the M20SX and found this to be ideal. The beam easily lit up the whole path, and about one metre on either side of it, for 50 metres or more, which is certainly enough to register obstacles ahead and brake safely.

I would not recommend using the maximum mode, unless you are in the middle of nowhere, as you will simply blind people coming in the opposite direction. Mountain bikers on very rough, unfamiliar territory may need the maximum, so it’s good that the M20SX is extra bright for at least 2 hours.

The Olight M20SX is a fantastic piece of outdoor equipment. It has a very attractive combination of terrific workmanship, above-average runtime on maximum and great output. It serves me very well outside, has useful extra functions and is easy to operate.

Related Buyer’s Guides

  • Best Flashlight For Hunting At Night
  • Best Budget Flashlight For AR 15
  • Best Flashlight For Deer Hunting
  • Best Throw Flashlight Under 100
  • Best Led Lantern For Power Outages

Share
Pin
Tweet
0 Shares

Related posts:

coyote hunting tipscoyote hunting tips Best Flashlight For Deer HuntingBest Flashlight For Deer Hunting Flashlight Switches – Its own Advantages and DisadvantagesFlashlight Switches – Its own Advantages and Disadvantages ight Weight BinocularsLight Weight Binoculars

Get Fresh Content Delivered

Join and get free content delivered automatically each time we publish.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Follow Us

  • Facebook
  • About Us
  • Disclaimer
  • Contact Us
  • Terms of Use
  • Privacy Policy
  • Resource Links
Hunting & Binoculars © 2017 - 2018 Hunting & Binoculars (huntingandbinoculars.com) is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com